Дом > Новости

What should you pay attention to when using the built-in pneumatic chuck?

11. 11, 2019

Although there are many products in the accessories category, there are not many popular or widely used accessories, and the built-in pneumatic chuck is a widely used accessory. The built-in pneumatic chuck is used. The general operation is very simple, but often many people are impatient because of its simple operation, resulting in problems during the operation.


At the same time, the general built-in pneumatic chuck will be used on the mechanical equipment, especially the built-in pneumatic chuck inside some automated equipment is very important, it can better let the equipment run. Although it is very useful, but because some users do not understand it, resulting in problems with the use of methods, this will not only affect the built-in pneumatic chuck, but also affect the corresponding equipment. The next article is introduced by the manufacturer for the use of built-in pneumatic chucks and how to use them correctly.

① Do not click the release button when the chuck is working.

② The air pressure adjustment should be within the range of 0.4Mpa-0.8Mpa, and it is forbidden to use in excess range.

③ The outer diameter of the air guiding hose is 8mm and the diameter is 6mm.

④ The workpiece is not clamped. It is forbidden to start the machine tool and work chuck.

⑤ It is strictly forbidden to wear gloves, wear loose clothing, and wear long hair for homework.

⑥ Stop the overspeed work chuck.

⑦ Do not use the limit speed when the workpiece scale is close to the chuck clamping limit.

⑧ The operator stops the operation of the machine tool without job training.


Proper operation should be done when using the built-in pneumatic chuck:

① The storage area of the chuck should adopt a useful method of preventing rain and moisture, and it is well ventilated. If placed in a place with high humidity, the chuck will rust and affect normal use.

② The packaging stack must not exceed 5 layers, regularly check the packaging status.

③ After reading the installation manual, enter the device program.

④ The chuck is the principle of constant ventilation. When working, stop the air source or press the release button to close the protective cover when working at high speed.

⑤ Turn off the power and air supply when installing and removing the chuck. Assuming that it is not closed, there will be a great security risk.

⑥ The speed of the chuck during use should not exceed the specified limit speed.

⑦ Non-professionals are not allowed to disassemble the chucks privately. If the user disassembles them, the chucks will not be used normally, and the user will bear the consequences.

⑧ The airway installation is prohibited from accessing open flames and heat sources.


I believe that in addition to the price issue when purchasing a pneumatic chuck, we also need to consider the quality problem. The price of the pneumatic chuck sold by the company is very affordable, the quality is stable, and you can buy it with confidence. If we cooperate with us, we must Will provide perfect after-sales service, and we will also become trustworthy friends.